Dangerous L.A. fault system rivaling the San Andreas tied to recent earthquakes (2024)

Monday’s magnitude 4.4 earthquake centered four miles northeast of downtown Los Angeles was modest but packed quite a jolt.

Although no major damage was reported, experts say the temblor was in the general area of a dangerous fault system — one they have long feared is capable of producing a catastrophic earthquake in the heart of the city.

The quake ruptured on a small section of a fault associated with the Puente Hills thrust fault system, which has long been cited as a major seismic hazard for Southern California because it runs through heavily populated areas and is capable of a huge quake.

Advertisem*nt

“It’s a reminder that this is actually our most dangerous fault,” earthquake expert Lucy Jones said, surpassing the San Andreas.

The length of the fault strand that ruptured and caused Monday’s quake was relatively tiny, perhaps only a few hundred feet across. Small earthquakes happen all the time on relatively tiny fault strands and most of the time are not followed by anything larger.

Still, Angelenos have been feeling rumbling since June from earthquakes centered in the Eastside neighborhood of El Sereno. And it’s a reminder of the seismic threats that are too often ignored in Southern California.

Advertisem*nt

Monday’s earthquake, centered about 1,100 feet southwest of Huntington Drive and Eastern Avenue, occurred in the same general area as a pair of quakes in early June — a magnitude 3.4 on June 2 and a magnitude 2.8 on June 4 — also associated with the Puente Hills thrust fault system. There also was a magnitude 2.9 quake in the area June 24.

“All of these earthquakes are closely spaced in three dimensions, just beneath the main Puente Hills thrust [fault] plane,” USC earth sciences professor James Dolan said. “They’re all associated with the same cluster of small events.

Advertisem*nt

“But the key thing is, they are very small events. These are very small earthquakes that don’t necessarily mean anything in terms of potentially being the harbinger of a future large magnitude earthquake on the Puente Hills thrust,” Dolan said.

The guide to earthquake readiness and resilience that you’ll actually use.

June 12, 2021

Still, people should be aware of the dangerous faults that lie under the metropolitan Los Angeles area.

Californians probably know the most famous of faults, the San Andreas, which in Southern California runs mostly beneath remote deserts and mountains. That fault plays a starring role in the 1978 movie “Superman,” with an aerial image of it in a sparsely populated area.

Despite its rural location, the southern San Andreas fault is considered quite dangerous, mostly because of its massive size and capability to bring strong, destructive shaking to a huge swath of Southern California in an immensely powerful magnitude 8 earthquake — something not seen in modern California history.

A simulation of a plausible major southern San Andreas fault earthquake — a magnitude 7.8 that begins near the Mexican border along the fault plane and unzips all the way to L.A. County’s mountains — could result in a death toll of 1,800 people.

By contrast, an earthquake on the Puente Hills thrust fault system probably would max out at a magnitude 7.5 — still powerful, but less so than the southern San Andreas. The effects, however, would be catastrophic: It could kill far more people — 3,000 to 18,000 people, according to the U.S. Geological Survey and the Southern California Earthquake Center. And the economic loss could be up to $252 billion, which would be the costliest disaster in U.S. history, even exceeding that of Hurricane Katrina in 2005.

Advertisem*nt

A key reason it is so fearsome is its location. The Puente Hills thrust fault system is in a broad zone directly underneath the densest parts of the L.A. area, including downtown Los Angeles, which has many old and unretrofitted buildings, as well as broad swaths of southeast L.A. County, the San Gabriel Valley and northern Orange County.

Among the buildings most at risk are those in with brittle concrete frames,which could crumble in a massive quake.

An interactive Times map illustrates the risk. A hypothetical magnitude 7 earthquake on the Puente Hills thrust fault would cause “violent” shaking, or level 9 on the Modified Mercalli Intensity Scale, over a broad stretch of the region, including Glendale, Koreatown, downtown, South L.A., Pico Rivera, Montebello, East L.A., Monterey Park, Alhambra, San Gabriel and Pasadena. “Violent” shaking is capable of such intensity that it can push buildings off foundations, and cause buildings such as apartments with flimsy first floors propping up carports — so-called “soft story” buildings — to collapse.

This region — from Mid-City to Arcadia and from Burbank to Watts — hasn’t seen that kind of intense shaking in modern times, an indication that surviving a past earthquake is by no means proof that a building will survive the next one. The level of shaking that this region of L.A. County region experienced during the 1994 Northridge earthquake was “strong,” which caused slight damage, if any, while it was the San Fernando Valley that had “severe” or “violent” shaking.

The risk of earthquakes highlights the importance of getting vulnerable buildings retrofitted. But even though some cities have made efforts to require building retrofits, many others have not.

California

4.4 earthquake was centered on notorious L.A. fault system

Los Angeles was hit by an earthquake centered in the Eastside, in El Sereno. The quake was felt over a wide swath of Southern California, but there were no immediate reports of damage.

Aug. 12, 2024

Another problem with a quake along the Puente Hills thrust fault system is that the soft sediment beneath the L.A. Basin amplifies the quake’s energy.

Advertisem*nt

Dangerous L.A. fault system rivaling the San Andreas tied to recent earthquakes (3)

A circle on a map shows the location of Monday’s 4.4. magnitude quake quake in Los Angeles.

(U.S. Geological Survey)

Scientists believe the Puente Hills fault has a major quake roughly every few thousand years — but they don’t know when the last one was. The San Andreas fault has quakes more frequently; it ruptures on average, in a very rough sense, every century or so. In Southern California, the last major earthquake on the San Andreas fault was in 1857, estimated at somewhere around a magnitude 7.8.

But even moderate quakes along the Puente Hills thrust fault system can cause major problems.

In 1987, the magnitude 5.9 Whittier Narrows earthquake left old brick buildings in Whittier’s downtown area battered. The quake also damaged some freeway bridges. More than 100 single-family homes and more than 1,000 apartment units were destroyed. It caused more than $350 million in damage. Eight deaths were reported.

In 2014, a magnitude 5.1 earthquake in La Habra struck under the Puente Hills thrust fault. Residents within 10 miles of the epicenter reported toppled furniture, broken glass and fallen pictures. Several water mains broke, and a rock slide in Carbon Canyon caused a car to overturn, leaving those inside with minor injuries. Officials said more than a dozen homes and apartments were red-tagged because of possible structural damage.

California

Some danced, some ducked and covered, others evacuated when quake jolted L.A. schools

A moderate earthquake jolted the first day of school in LAUSD, causing jitters and testing school preparedness.

Aug. 12, 2024

The Puente Hills thrust fault system was previously unknown to scientists when it ruptured in 1987. Scientists discovered the fault in 1999.

Advertisem*nt

Five years earlier, the magnitude 6.7 Northridge earthquake hit on another “invisible” fault — completely underground, without coming to Earth’s surface — that scientists didn’t know about.

Dangerous L.A. fault system rivaling the San Andreas tied to recent earthquakes (5)

Items fell off shelves of a store in Alhambra during Monday’s earthquake.

(Karen Kaplan / Los Angeles Times)

Los Angeles has widely felt two quakes in a week: Monday’s magnitude 4.4 in El Sereno and last week’s magnitude 5.2 about 18 miles southwest of Bakersfield. In both cases, the state’s early warning system sent out alerts.

People should heed the lessons from this modest earthquake, Dolan said, and take action to prepare for future ones, such as buying extra water for their homes and workplaces and securing spaces, such as fastening bookshelves to walls.

“If it inspires even a few people to do that ... that’s a good thing for L.A.,” Dolan said.

“People really need to be ready for a very, very large earthquake, or earthquakes, in L.A.’s future,” he said. “It’s going to happen. We don’t know when. We don’t know exactly which fault is going to generate those earthquakes, but they are going to happen.”

More to Read

  • It was the strongest SoCal quake in three years. Here’s why it packed such a punch in L.A.

    Aug. 7, 2024

  • Magnitude 4.1 earthquake shakes up Bakersfield

    June 24, 2024

  • Los Angeles’ Eastside shaken by third earthquake in a month

    June 25, 2024

Dangerous L.A. fault system rivaling the San Andreas tied to recent earthquakes (2024)

FAQs

Dangerous L.A. fault system rivaling the San Andreas tied to recent earthquakes? ›

The Puente Hills thrust fault

thrust fault
A thrust fault is a break in the Earth's crust, across which older rocks are pushed above younger rocks. Thrust fault in the Qilian Shan, China. The older (left, blue, and red) thrust over the younger (right, brown). The Glencoul Thrust at Aird da Loch, Assynt in Scotland.
https://en.wikipedia.org › wiki › Thrust_fault
is a broad, rectangular area. Areas directly above the fault would see intense shaking in a major earthquake. Map shows the approximate location of the Puente Hills thrust fault, which stretches from the Glendale and Pasadena in the west to Puente Hills to the east.

Is the San Andreas Fault dangerous? ›

Scientists project the San Andreas fault line could cause a devastating earthquake in California by 2030. This fault has caused some of the biggest earthquakes in California with a magnitude. Most of California's population lives and works on the west side of the fault.

Why are earthquakes common along the San Andreas Fault in California? ›

Tectonic Plate Boundaries

The Pacific Plate (on the west) slides horizontally northwestward relative to the North American Plate (on the east), causing earthquakes along the San Andreas and associated faults. The San Andreas fault is a transform plate boundary, accomodating horizontal relative motions.

Which type of fault is associated with the San Andreas Fault? ›

The San Andreas Fault—made infamous by the 1906 San Francisco earthquake—is a strike-slip fault. This means two fault blocks are moving past each other horizontally. Strike-slip faults tend to occur along the boundaries of plates that are sliding past each other.

Will the San Andreas Fault destroy California? ›

The strike-slip earthquakes on the San Andreas Fault are a result of this plate motion. There is nowhere for California to fall, however, Los Angeles and San Francisco will one day be adjacent to one another! Learn more: Earthquakes, Megaquakes, and the Movies.

What would a 9.0 earthquake do to California? ›

A catastrophic M9. 0 CSZ earthquake would cause violent ground shaking in several coastal areas in Del Norte, Humboldt, and Mendocino counties and generate a tsunami with estimated wave heights of between 5 and 15 meters (16 – 49 ft.) in Crescent City, and up to 12 meters (39 ft.) in Eureka/Humboldt Bay.

What is the deadliest fault line in the US? ›

Scientists have studied the faults extensively and determined that the Hayward is probably the most dangerous. It has a 31.7% chance of rupturing in a 6.7 magnitude earthquake or greater before 2036, and the Bay Area has a 63% chance of having at least a magnitude 6.7 earthquake in the same time period.

Where is the biggest fault line in the world? ›

San Andreas Fault
CitiesSan Francisco, San Bernardino, San Juan Bautista
Characteristics
SegmentsCalaveras, Hayward, Elsinore, Imperial, Laguna Salada, San Jacinto
Length1,200 km (750 mi)
16 more rows

What cities will be affected by the San Andreas Fault? ›

If it ruptures down south, then LA and San Diego will take a good hit. If it ruptures near San Francisco, then San Francisco, San Jose, and Oakland would take a hit (and not LA or San Diego) and Sacramento would get some shaking as well. (In 1906, shaking was felt well into Nevada.)

Why are there so many earthquakes in California right now? ›

The Modoc Plateau has both active volcanoes and faults. Much of the north-eastern part of the state is actively stretching apart, creating numerous faults, all capable of producing earthquakes.

Is California likely to fall off into the Pacific Ocean? ›

The strike-slip earthquakes on the San Andreas Fault are a result of this plate motion. The plates are moving horizontally past one another, so California is not going to fall into the ocean. However, in about 12 million years, Los Angeles and San Francisco will be adjacent to one another!

When was the last time the San Andreas Fault was active? ›

On September 28, 2004, a magnitude 6.0 earthquake occurred on the San Andreas fault near Parkfield. It ruptured the same segment that ruptured in 1966 and was the seventh earthquake on this stretch of the fault since 1857. Strong shaking was felt for about 10 seconds.

Where is the safest place from earthquakes in California? ›

What Are the Safest Cities in California From Earthquakes? Identifying the safest place in California for earthquakes involves examining geological stability. Cities like Sacramento, Fresno, and San Diego often top the list due to their geographical locations which are relatively distant from the San Andreas Fault.

Is a 10.0 earthquake possible? ›

No fault long enough to generate a magnitude 10 earthquake is known to exist, and if it did, it would extend around most of the planet. The largest earthquake ever recorded was a magnitude 9.5 on May 22, 1960 in Chile on a fault that is almost 1,000 miles long…a “megaquake” in its own right.

What would a 7.0 earthquake do to California? ›

Located 30 miles from downtown Los Angeles, the Southern San Andreas fault could produce a magnitude 7 earthquake or greater that would heavily shake the nation's second largest city. USGS scenarios project more than 1,800 deaths, 50,000 injuries, and $200 billion in damage to homes, buildings and roads.

What would happen if the San Andreas fault exploded? ›

If the San Andreas ruptured, it would cause 'collapses of vulnerable structures, substantial interruption of critical services [including] water, cell phone, [and] transportation systems,' Stewart said.

What cities are in danger of the San Andreas fault? ›

According to this study, a major earthquake on that southern section of the San Andreas fault would result in major damage to the Palm Springs–Indio metropolitan area and other cities in San Bernardino, Riverside and Imperial counties in California, and Mexicali Municipality in Baja California.

Can you walk on the San Andreas fault? ›

It is a strange idea to be right on top of the San Andreas fault line! The hiking here is not to strenuous and there is a boardwalk which would also be OK for people who are not accustomed to hiking.

Can you drive through the San Andreas fault? ›

You can drive across the San Andreas Fault in many places, however there is not a road that follows on top of the fault itself.

References

Top Articles
Latest Posts
Article information

Author: Gregorio Kreiger

Last Updated:

Views: 6137

Rating: 4.7 / 5 (57 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Gregorio Kreiger

Birthday: 1994-12-18

Address: 89212 Tracey Ramp, Sunside, MT 08453-0951

Phone: +9014805370218

Job: Customer Designer

Hobby: Mountain biking, Orienteering, Hiking, Sewing, Backpacking, Mushroom hunting, Backpacking

Introduction: My name is Gregorio Kreiger, I am a tender, brainy, enthusiastic, combative, agreeable, gentle, gentle person who loves writing and wants to share my knowledge and understanding with you.